How to Reinstall Windows 10 and Keep Your Files

Microsoft may have described Windows 10 as the ‘final version of Windows’ when it first launched, but that’s not the case.

After plans for a spin-off in Windows 10X were cancelled, Microsoft decided that 2021 was the time for a true successor. Predictably, it’s called Windows 11, although the changes introduced are certainly not for everyone. The redesigned Start menu and taskbar have been controversial, while the new multitasking functionality and the Utilities panel need some getting used to.

But below the surface, not a huge amount has changed. Unless you value native Android app support through the Amazon Appstore, you may have decided to stick with Windows 10. After all, it will continue to be supported until October 2025.

However, these are your only two realistic options in 2022. Technically, Windows 8 doesn’t reach the end of life in January 2023, but we wouldn’t recommend anyone to use the operating system. obsolete behavior. The same can be said of Windows 7, which has been officially unsafe for over two years.

At this point, most people will take advantage of the free upgrade from Windows 10 to Windows 11. Installing it is a relatively straightforward process, but reinstalling Windows 10. That’s the focus. of this article, as Microsoft has provided several different methods. .

Things to know before you start

There is even one that can install a new operating system without affecting your files or some installation options. It also means you’ll automatically be updated to the latest version of Windows 10, which is good news if you’re a bit slow to update your software.

As with many installation guides, the speed of this process will depend on the hardware you are working with. An SSD will be much faster than a mechanical hard drive to reinstall Windows 10. Considering you will be downloading new software, it will also take a long time if the internet connection is slow. Read our tips on how to increase your internet speed if you think this could be the problem.

Just don’t expect to use the device for a while after the reinstallation begins – your PC could be down for up to two hours.

Warning: Before reinstalling Windows using the procedure below, you should also back up all your files, music, photos, videos, game saves, and website bookmarks. While all of this will be kept, the risk is too great not to make backup copies of any documents that you cannot replace.

You probably already have a backup of those, but because all your apps will be deletedyou should also:

  • Unregister any apps that will need to be reactivated after you reinstall them (such as older versions of Photoshop)
  • Learn how to back up your game progress so you don’t have to start over
  • Save bookmarks (or sign in to Chrome or Firefox to have them saved to the cloud)
  • Find any activation keys you may need to reinstall apps after Windows is reinstalled
  • Download and save the driver for your network adapter (Ethernet or Wi-Fi) to ensure you can reconnect to the Internet
Read More:   What Google Knows About You & How to Control Your Data

One more job before you start. If you haven’t already done so, you should associate your Windows 10 product key with your Microsoft account. If you don’t do this, Windows 10 may not reactivate after you reinstall. But Windows 10 doesn’t necessarily have a product key, and if you’ve previously upgraded from Windows 7 or 8, you probably won’t have one.

Whether you have a Windows 10 product key or not, go to Settings > Update & Security > Activation. If the status says “Windows is activated with a digital license” but is no longer available, it is not associated with your Microsoft account.

How to reinstall Windows

To fix that, go to Settings > Accounts > Your Info. Click “Sign in with a Microsoft account” and follow the prompts. Once done you can check in Activation and now you will see that the message read “Windows is activated with a digital license associated with your Microsoft account.”

However, this only applies to individual accounts – you may still see the “Windows activated with a digital license” message if your employer manages your PC. Don’t worry, you can still reactivate Windows 10 after reinstalling.

How to reinstall Windows 10

Provided your computer can boot into Windows 10, open the Settings app (the gear icon in the lower left of the Start menu), then click Update & Security. Click Restore, then ‘Start’ under ‘Reset This PC’.

Reinstall Windows 10

From the pop-up that appears, click ‘Keep my files’.

Reinstall Windows 10

On the next screen, choose whether you want to download and reinstall Windows 10 from the cloud or based on existing files from your device. The former will consume more data, but local installations usually take longer.

Reinstall Windows 10

From the following screen, select ‘Change settings’.

Reinstall Windows 10

Now click the toggle under ‘Restore Preinstalled Apps?’ to select No. Click ‘Confirm’ to save your changes.

Reinstall Windows 10

You will now be returned to the previous screen, but this time the first bullet point will be ‘Do not restore apps and settings that came with this PC’. If that’s the case, click ‘Next’.

Reinstall Windows 10

After a few seconds, you’ll see a summary of the reset you’re about to perform. If you are satisfied with this, click ‘Reset’ to begin the process.

Read More:   How To Watch Oprah's Interview With Harry And Meghan In The UK

Reinstall Windows 10

After 20-40 minutes, Windows will be reinstalled and you will see the login screen. Again, follow the prompts like for a new PC to select the region, language, keyboard layout, password, and other information Windows 10 needs before you’re taken to the new screen.

Since this is really a clean install, no drivers will be installed for your hardware. That’s not a problem with Windows 10, as it can automatically install and configure everything automatically – as long as it can connect to the Internet.

To check, click the icon to the left of the speaker icon (volume) as shown below. The image below will show if you are connected via ethernet, but the Wi-Fi connection will show like the icon next to ‘ICO Guest WiFi’.

How to reinstall Windows

If there are no Wi-Fi networks in the list and the message says no connections are available, wait and see if Windows manages to install the network drivers automatically, or install them manually (as long as you have downloaded them as previously announced).

Once you have a working internet connection, let Windows do its thing for at least half an hour. Then check Device Manager (right click on the Windows icon at the bottom left of the screen to see it in the menu). If all is well, there should be no yellow exclamation mark next to any device. Here, you can see that the driver is missing for the network controller.

How to reinstall Windows

If yours looks like this, double-click the network controller’s name to bring up the properties. Click Update Driver in the window that opens and direct it to the driver you downloaded earlier – you may have to extract the files if the download has the .zip file extension. And to do that, just double click on the downloaded file and choose where to extract the content.

What if I can’t access Settings?

If you are unable to boot into Windows 10 and therefore cannot follow the steps above then try the following steps.

First, turn on your computer and look for any messages that appear before the Windows logo. Some laptops and PCs have a ‘hidden’ hard drive on which is a full backup of Windows. Usually there will be a message like “Press F10 for recovery options”. Every PC is different, but you can find an option to reset your PC to factory settings. What this does is erase everything on the hard drive and copy the hidden version of Windows back to the hard drive so your computer will look exactly like the day it shipped.

Read More:   How To Save A Web Page As A PDF

You can also try pressing the F8 key to access the advanced boot options menu, which will include a ‘Repair Your Computer’ option.

If none of that works, try these steps:

1. Download Microsoft’s Media Creation tool, which will create a bootable USB flash drive with Windows 10 on it. You may need to use a working computer to do this if your computer won’t boot into Windows. Keep this drive safe for future reinstalls. You can also use the drive to upgrade an existing Windows installation simply by running Setup.exe from the drive when running Windows 7 or 8.

2. Boot the inactive PC from your USB flash drive. But before you do, make sure you have a backup everything, as this will wipe your C: drive. If you haven’t backed up any files, you may have to remove the hard drive and connect it to a working PC to copy them.

3. If the PC won’t boot from the USB drive, enter the BIOS by pressing Delete, F2 (or the key shown on the boot screen) and then look for the ‘boot’ or ‘startup’ options where you can select the USB drive mobile as the first boot device.

4. Once the PC has successfully booted from your USB flash drive, you will see the Windows logo and then the screen like below where you choose your language. Simply follow the instructions and make sure you choose the correct hard drive and partition to install Windows on. If it’s a new drive, it will be empty, so you choose the only option available: large unallocated space.

How to reinstall Windows 10

4. Once the installation starts, your PC will reboot. You should see the Windows logo and a large circular progress indicator. Follow the installation process as it will restart your computer several times and may ask you to remove the DVD or flash drive.

How to reinstall Windows 10

Last, What’s In Your Box sent you details about the topic “How to Reinstall Windows 10 and Keep Your Files❤️️”.Hope with useful information that the article “How to Reinstall Windows 10 and Keep Your Files” It will help readers to be more interested in “How to Reinstall Windows 10 and Keep Your Files [ ❤️️❤️️ ]”.

Posts “How to Reinstall Windows 10 and Keep Your Files” posted by on 2022-02-16 16:20:00. Thank you for reading the article at

Back to top button