How to Install macOS on a Windows PC

Except for the simpler Chromebook experience, there are really only two operating systems to choose from when buying a PC or laptop.

So far, Windows is still the market leader, but that’s partly because there are so many devices running Microsoft’s software.

The unique design of macOS and its ability to integrate with other Apple devices have made it a company favorite for many, albeit with only a handful of expensive devices.

What if you could run macOS on a seemingly Windows-specific device. It’s not an officially available feature, but there To be one way to do it. However, you will need to use a macOS device for it to work.

How to Install macOS on Windows

Before proceeding, you should try this method on a device other than your main one.

While we know that this method works on the device we tested it on, there is no guarantee that it will be exactly the same on all Windows PCs. It can also be difficult to revert to Windows if you change your mind at any time.

With that disclaimer, here are the steps you need to take.

Make sure you have a compatible PC

For the process to work, you’ll need a PC with a 64-bit Intel processor. These are relatively common, but it may not work differently.

It is important to have a second hard drive on the target device, preferably one with more than 500GB of spare capacity. While you can technically run macOS from an external hard drive, the end result will be much better if it’s built-in. That’s especially true if you’re trying to install it to a laptop.

Read More:   How to Watch the Brit Awards 2022: TV or Online

However, you will need a USB flash drive to transfer data. A similar capacity as above is recommended.

Also, make sure that the Mac you’re using is running macOS Sierra (2017) or later. Older versions will not be supported through the current method.

Create a macOS installer and install it on a flash drive

  1. Go to the download page on tonymac86.com and search for ‘UniBeast’ for the software version your device is running. If you’re not sure, click the Apple icon at the top left of the screen and select ‘About This Mac’
    UniBeast
  2. Once downloaded, make sure it’s installed, like you would with any other app
  3. Plug in the USB flash drive and open Disk Utility. The easiest way is to click on the magnifying glass in the corner and search for it
  4. If the device has multiple ‘partitions’, click the Partition option at the top of the screen and click the minus (-) icon below the pie chart that appears. Before pressing apply make sure Format is set to ‘Mac OS Extended (Journaled)’ and Scheme is ‘GUID Partition Map’
  5. Launch the UniBeast application you installed earlier and select the USB drive as the destination for the installer
  6. Continue through the next few screens, until you see a screen asking which operating system you want to install. Select the same version installed on that device
  7. On the next screen, select UEFI. In the unlikely event that you are using a device with an alternate BIOS (usually prior to 2007), press Legacy instead
  8. If you have integrated Intel graphics, you can skip to the next screen. You only need to specify your graphics card if it is not compatible with macOS
  9. Download the MultiBeast app from the same website as before. Again, make sure you have selected the correct version of macOS that you are migrating to
  10. Once installed, drag it to a USB flash drive, as you will need it for the installation process

    Install macOS on a Windows device

  11. On a PC or laptop, plug in the USB flash drive and reboot your device
  12. It will now boot back to UniBeast by default. Navigate with the arrow keys to ‘Outside’ and press enter
  13. Select the destination drive if it is displayed. If not, go to Disk Utility, right click where you want to install it and click ‘Erase’. Again, before you hit apply, mmake sure Mac OS Extended (Journaled) is selected and Scheme is set to GUID Partition Map
    Disk partition
  14. After it’s deleted, you should now see that option as a target drive. Click on it and wait until macOS starts installing. This process will take about 30 minutes
  15. Once done, reboot your device, make sure the USB drive is still plugged in
  16. Select the UniBoot menu and your PC will now boot into macOS!
Read More:   How To Watch French Ligue 1 Football Live In The UK and US

As you can see, it’s a long and complicated process, with lots of small tweaks needed. For many, it simply won’t be worth it. If you just want to emulate Windows on your Mac, instead of reinstalling the entire operating system, check out our guide on how to install a virtual machine in Windows 10.

Why do I want macOS on a Windows device?

Apple’s MacBook range is already the gold standard when it comes to high-end design, but there are some hardware limitations that can let people down.

The lack of face unlock, limited port selection, and the controversial butterfly keyboard (until 2020) are all reasons why you might prefer other manufacturers’ hardware.

MacBooks aren’t cheap either, there are even entry models that push it to four figures. If you’re looking for a desktop PC, the price can skyrocket. All the entries in our best budget laptop rankings are Windows devices.

However, despite its popularity, Microsoft’s operating system is certainly not for everyone. Many people won’t appreciate the vast customization options, while it has had problems with stability in recent months.

Last, What’s In Your Box sent you details about the topic “How to Install macOS on a Windows PC❤️️”.Hope with useful information that the article “How to Install macOS on a Windows PC” It will help readers to be more interested in “How to Install macOS on a Windows PC [ ❤️️❤️️ ]”.

Posts “How to Install macOS on a Windows PC” posted by on 2020-08-24 15:00:00. Thank you for reading the article at whatsinyourbox.org

Back to top button